Shopping List
Shopping List
SGD - S$
Image
/
/
/
/
Enerpac Cylinder, Aluminum, 30 Ton, 10'', Hollow, D/A RARH3010
Enerpac Cylinder, Aluminum, 30 Ton, 10'', Hollow, D/A RARH3010
Brand:
Enerpac
Model:
RARH3010
Image
Image
Product Description

Enerpac Cylinder, Aluminum, 30 Ton, 10'', Hollow, D/A RARH3010

Model : RARH3010

Series : RARH

Product Lines : Industrial Tools

  • Lighter and shorter collapsed height than equivalent RACH single-acting models
  • Double-acting for rapid retraction, regardless of hose lengths or system losses
  • Built-in safety valve prevents accidental overpressurization
  • Hollow plunger design allows for both pull and push forces
  • Composite bearings increase cylinder life and side load resistance
  • Hard coat finish on all surfaces resists damage and extends cylinder life
  • Handles included on all models
  • Floating center tube increases seal life
  • Steel baseplate and saddle for protection against load-induced damage
  • Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
  • CR400 coupler and dust cap included on all models
  • All cylinders meet ASME B-30.1 standards

Maximum Operating Pressure (psi) 10,150

Capacity Class (tonnage) 30

Maximum Cylinder Capacity Advance ( 40.3

Maximum Cylinder Capacity Retract (tons) 21

Stroke (in) 9.84

Collapsed Height A (in) 16.1

Extended Height B (in) 25.94

Return Type Double-Acting, Hydraulic Return

Plunger Type Hollow

Material Aluminum

Cylinder Effective Area Advance (in2) 7.94

Cylinder Effective Area Retract (in2) 4.14

Oil Capacity Advance (in3) 78.15

Oil Capacity Retract (in3) 40.72

Surface Treatment Anodized

Weight (lbs) 32.8

Collapsed Height A (in) 16.1

Extended Height B (in) 25.94

Outside Diameter D (in) 5.31

Cylinder Bore Diameter E (in) 3.74

Plunger Diameter F (in) 2.95

Base to Advance Port H (in) 0.86

Saddle Diameter J1 (in) 2.49

Saddle Protrusion from Plunger K (in) 0.38

Plunger Internal Thread O (in) 1 13/16"-16 UN

Plunger Thread Length P (in) 0.91

Base Mounting Holes Bolt Circle U (in) 4.33

Base Mounting Holes Thread V M6

Center Hole Diameter Y (in) 1.34

Base Mounting Holes Thread Depth Z (in)0.47

S$ 3,605.80
(exc. GST)
S$ 3,930.32
(inc. GST)
Image
This product will be active soon.
Quantity:
/ EA
This item is sold by
Image
SG-6472715286
Highly Matched Items
View items that have the same or are a close match to the specifications of this item
Hydraulic Jacks from Enerpac
Source & compare similar products
More from Hydraulic Jacks
Expand your search with a wider selection
Recently Viewed Products
Compare & Refer to previously viewed items
Image
Top