Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM

This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.

• Range of Product: Telemecanique Safety Light Curtains XUSL
• Product or Component Type: Safety Module
• Safety Module Name: XPSCM
• Safety Module Application: For monitoring of single-beam photo-electric sensor
• Function of Module: Built-in muting
• Safety Level:
  Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1
  Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061
  Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1
• Safety Reliability Data:
  MTTFd = 16.6 years conforming to EN/ISO 13849-1
  DC = 95.5% conforming to EN/ISO 13849-1
  PFH = 3.12E-7 1/h conforming to EN/IEC 61508
  PFHd = 3.12E-7 1/h conforming to EN/IEC 62061
• Number of Inputs:
  2 (terminals MA, MB) for muting function
  4 (terminals Z1, Z2, Z3, Z4) for sensor
• Input Voltage:
  24 V DC for sensor
  24 V DC (terminals U+, U-) for muting function
• Input Compatibility:
  XC limit switch for muting function
  XU2M18PP340... for muting function
  XU2S18PP340... (infrared) for sensor
  XU9M18PP340... for muting function
• Connections - Terminals:
  
  Captive screw clamp terminals:
• 1 x 0.14...1 x 2.5 mm² solid or flexible without cable end
• 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel
• 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel
• 2 x 0.14...2 x 0.75 mm² solid or flexible without cable end
• 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel
• 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel
• Output Type: Relay 2 NO (13-14, 23-24), volt-free
• Number of Additional Circuits: 0
• Rated Supply Voltage: 24 V DC -20...20%

Complementary

Sensor Power Supply:

• U+, U-: 24 V DC
• Maximum Supply Current for Sensors: 200 mA

Input Current:

• 200 mA for muting function

Synchronization Time Between Inputs:

• 3 s (+/- 20%) for the activation of the MA/MB muting signal

Muting Maximum Duration:

• 60 s (-10...30%)

Maximum Line Resistance:

• 10 Ohm for sensor power supply

Breaking Capacity:

• 180 VA holding AC-15 C300 relay output
• 1800 VA inrush AC-15 C300 relay output
• 20 mA at 24 V for solid-state output
• 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output

Associated Fuse Rating:

• 4 A gG for relay output conforming to DIN VDE 0660 part 200
• 4 A gG for relay output conforming to EN/IEC 60947-5-1
• 6 A fast blow for relay output conforming to DIN VDE 0660 part 200
• 6 A fast blow for relay output conforming to EN/IEC 60947-5-1

Minimum Output Current:

• 10 mA for relay output

Minimum Output Voltage:

• 17 V for relay output

Maximum Response Time on Input Open:

• 25 ms

Local Signaling:

• 1 LED, function electronic internal fuse status
• 1 LED, function restarting
• 1 LED, function safety outputs closed
• 1 LED, function safety outputs open
• 1 incandescent lamp, function muting power consumption: 4…6.5 W

Output Thermal Current:

• 5.6 A per relay
• 11 A maximum

Power Consumption in W:

• 15 W

Protection Type:

• Electronic internal fuse

Rated Insulation Voltage [Ui]:

• 300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2
• 300 V (pollution degree 2) conforming to EN/IEC 60947-5-1

Rated Impulse Withstand Voltage [Uimp]:

• 4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2
• 4 kV overvoltage category III conforming to EN/IEC 60947-5-1

Environment:

• Ambient Air Temperature for Operation: -10…55 °C
• Ambient Air Temperature for Storage: -25…85 °C
• IP Degree of Protection:
• IP20 (terminals) conforming to IEC 60529
• IP40 (enclosure) conforming to IEC 60529